Open at shop and on phone between 16-20 Weekdays and 11-15 (OBSERVE New time) Weekends * call +46 (0) 303-776303
Click on "Chat with us" and we can help you immediately!
* We can be busy, call again if we don´t answer!
BrandBlack Horse Model
Operating mode:Fuel
Electrical
Delivered as:Almost-Ready-To-Fly
Suitable for:Experienced
Plane type:Scale
Span:1850 mm
Length:1660 mm
Weight:6000 g
Wing Area:89,4 dm2
Material:Wood
ESC:Not Included
Transmitter:Not Included
Motor:Not Included
Aileron:Yes
Battery:Not Included
Charger:Not Included
Need to be completed with:8 servos, BL Motor system el. Methanol engine el. Petrol engine, Radio equipment
BrandBlack Horse
Description
Article no.: BH160
Black Horse BUCKER BU 131 JUNGMANN
Black Horse have done a stunning job in re-creating the classic lines of the German Bucker Bu 131 Jungmann. This classic biplane served as a mainstay in pilot training due to its benign flying chrematistics and excellent aerobatic performance.
This Black Horse recreation is made from CNC cut balsa and ply on accurate jigs to ensure each model is lightweight, straight and true.
The structure is then covered with high quality Oracover iron-on film in the classic yellow Swiss training scheme.
The cowling is made from lightweight fibreglass and pre-painted to match. The rigging is been kept simple and the wings are built strong enough that only struts are necessary, saving value time at the field when assembling.
The aluminium undercarriage is tough and includes extra scale bracing for a realistic look. Ground handling is easy thanks the steerable rear tail wheel.
Built for electric, glow or petrol power the Bu 131 is extremely versatile and practical. There is a large hatch for easy battery changes or radio access at the field. With the right motor up front the Jungmann excels in scale aerobatics such loops, rolls, cuban eights, stall turns and much more...
With a wingspan of over 1.8 metres and the bright yellow scheme this model really stands out down the local flying club before you even take off!
All Balsa & Ply Wood Construction
Covered With Oracover Film
Iconic colour scheme
Suitable for either electric and I/C power
SPECIFICATION:
Wingspan: 1850 mm
Length: 1660 mm
Weight: 6 kg
Wing area: 89.4 dm2
Wing loading: 67.1 g/dm2
Wing type: Naca Airfoil
Servo mount: 42 x 21 mm
Gear type: Aluminium Hi-grade for main gear and spring wire for tail gear (included)
Parts listing required (not included):
Radio: 6 channels
Servo: 8 servos
Engine: 120 – 2 stroke; 20 – 30 cc Gas
Motor: Brushless outrunner 1800-2300W, 450KV
Propeller: Suit with your engine
Recommended motor and battery set up (not included):