• Kvalitetsprodukter för RC
  • Snabba leveranser
  • Ring +46 (0) 303-776303
  • Maila oss, vi svarar snabbt
0
Varukorg
RC ElektronikPowerBoxPowerBox SystemPowerBox 4250 EVO
PowerBox 4250 EVO
PowerBox 4250 EVO
PowerBox 4250 EVO - 2
PowerBox 4250 EVO - 3

PowerBox 4250 EVO

2 695 SEK/styck
Powerful dual battery power supply with 7 channels, voltage regulators and telemetry.
Läs mer...

Beställningsvara

  • Betala säkert med kort
  • Maila oss, vi svarar snabbt!
  • Snabba leveranser
  • Öppet i butik och telefon mellan 9-18 Vardagar samt 10-15 (OBS Ny tid) på Lördagar*, ring +46 (0) 303-776303

* Vi kan vara upptagna, ring igen om vi inte svarar!

  • VarumärkePowerBox

Beskrivning

Art.nr: MD_4250

Features

  • 7 channels
  • 10 outputs
  • High-performance battery backer with high continuous load capacity
  • All power electronics duplicated
  • Redundant electronic switch
  • Four selectable output voltages: 6.0V, 7.4V, 7.8V or unregulated

 

  • Telemetry data for PowerBox P²BUS, Futaba S.BUS2, Jeti Ex-BUS, Spektrum, SRXL2, Multiplex M-Link, JR X-BUS and Graupner HoTT
  • All features can be controlled from PowerBox and Jeti transmitters
  • Signal amplification for all 10 outputs
  • Voltage indication by means of tri-colour LEDs
  • Supports four battery types: LiPo, LiIon, NiMh/NiCd, LiFe
  • Servo feedback current suppression
  • Machined high-performance heat-sink for optimised heat dissipation
  • Machined, anodised aluminium switch case
  • Compact format
 

Technical Data

Operating voltage4.0V - 9.0V
Power supply2S LiPo, 2S Lilon, 2S LiFePo, 5S NiMH
Current drain Power-on state66mA
Current drain Standby8μA
Maximum load current2x10 A (<30s 2x 40A)
Drop-out voltage0.3V
Output voltage6.0V, 7.4V, 7.8V, unregulated
Signal inputPWM
Supported RC systemsPowerBox, Futaba, Jeti, Spektrum, Multiplex, JR, G
Channels7
Servo sockets10
Supported telemetry systemsP²BUS, S.BUS2, EX-BUS, SRXL2, M-Link, Hott, JR-DMS
Dimensions89 x 55 x 18 mm
Weight69g
Weight Sensor Switch8g
Temperature range-30°C to +105°C

Set contents

  • PowerBox Evo
  • MicroSwitch
  • 8x patch leads
  • 6x fixing screws
  • 4x rubber grommets and brass sleeves
  • Operating instructions
   
 

Product description

The PowerBox Evo is an ultra-compact dual power supply featuring 7 channels, regulated output voltage and telemetry.

The 7 inputs are assigned to 10 outputs, allowing two servos to be controlled in parallel on each of 3 channels, without requiring additional Y-leads. All servo outputs have integral signal amplification and are protected against servo feedback currents.

The PowerBox MicroSwitch included in the set is not subject to wear, and operates both electronic switches reliably. It is also used to set the output voltage and the battery type.

 

By default the two high-performance voltage regulators deliver 6.0V, but that value can easily be changed to 7.4V, 7.8V or no regulation at all using the PowerBox MicroSwitch.

The machined aluminium heat-sink ensures a high continuous load capacity.

The PowerBox Evo supports all current telemetry systems: PowerBox, Jeti, Futaba, Multiplex, Graupner, Spektrum and JR, which means that the voltage of both batteries can be monitored conveniently from the transmitter. It is also possible to read off the state of charge of the batteries at any time using the two tri-colour LEDs.

 
   

Filer och media

Manual
Tillbaka till toppen