Features
- 26 channels
- High-performance battery backer with high continuous load capacity
- Four P²-BUS outputs with full telemetry support for servos
- 2.4" TFT screen, legible in sunlight
- Bi-lingual menu system
- Consistent duplication of all power electronics
- Redundant electronic switch
- Servo matching for all 26 outputs
- Auto matching function
- Two independent door sequencers with Setup Assistant
- The latest integrated iGyro technology, using the iGyro SAT as gyro sensor
- Twelve independent gyro outputs for: 4x aileron, 4x elevator, 4x rudder
- Individual gain control for all twelve gyro outputs
- Special regulatory algorithm for fixed-wing models
- System detects all transmitter mixers
- Four selectable output voltages: 6.0 V, 7.4 V, 7.8 V or unregulated
- Two different voltage levels, separately adjustable for left and right side Graphic menu diagrams ensure ultra-simple programming
- Simplest programming through graphical representation of the menus
- Fast basic setup procedure using the sophisticated Assistant
- Optional GPS III for speed-dependent gyro compensation
- Telemetry data for PowerBox P²BUS, Futaba S.BUS2, Jeti Ex-BUS, Spektrum SRXL2, Multiplex M-Link, JR DMSS and Graupner HoTT
- Transmission of battery, receiver and GPS data
- Virtually all features can be controlled from PowerBox and Jeti transmitters
- Selectable servo frame rate: 10ms, 12ms, 14ms, 16ms, 18ms
- Servo feedback current suppression
- Latest 32-bit micro-processor for precise, high-speed signal processing
- High-performance machined heat-sink for optimised heat diffusion
- Machined, anodised aluminium switch and screen case
- Compact dimension
|
|
Technical Data
| Operating voltage |
4.0V - 9.0V |
| Power supply |
2S LiPo, 2S LiIon, 2S LiFePo, 5S NiCd/NiMH |
| Current drain Power-on state |
300mA (with TFT) |
| Current drain Standby |
60µA |
| Maximum load current |
Peak 4 x 20A |
| Drop-out voltage |
0.3V |
| Output voltage |
6.0V, 7.4V, 7.8V, unregulated |
| Signal input |
serial |
| Supported RC systems |
PowerBox, Futaba, MPX, Jeti, Spektrum, JR, Graupne |
| Receiver redundancy |
SRS |
| Channels |
26 |
| Servo sockets |
26 |
| Programmable servo outputs |
26 |
| Servo signal resolution |
0.5µs |
| Signal frame rate |
10ms, 12ms, 14ms, 16ms, 18ms |
| Gyro regulation |
Heading- and Normalmode |
| Gyro sensor type |
extern iGyro SAT |
| Number of sensor axes |
12 |
| Screen |
TFT 320x240 Pixel |
| Integral door sequencer |
2x |
| Supported telemetry systems |
P²BUS, S.BUS2, EX-Tele, SRXL2, M-Link, Hott, X.BUS |
| Dimensions |
136 x 82 x 18 mm |
| Weight |
162g |
| Weight Sensor Switch |
15g |
| Weight of LCD screen |
34g |
| Temperature range |
-30°C to +105°C |
|
