• Kvalitetsprodukter för RC
  • Snabba leveranser
  • Ring +46 (0) 303-776303
  • Maila oss, vi svarar snabbt
0
Varukorg
Savöx SW2293SG Crawler Servo 75Kg 3S Powered Alu Brushless Ståldrev WP
Savöx SW2293SG Crawler Servo 75Kg 3S Powered Alu Brushless Ståldrev WP
Savöx SW2293SG Crawler Servo 75Kg 3S Powered Alu Brushless Ståldrev WP - 2
Savöx SW2293SG Crawler Servo 75Kg 3S Powered Alu Brushless Ståldrev WP - 3

Savöx SW2293SG Crawler Servo 75Kg 3S Powered Alu Brushless Ståldrev WP

1 545 SEK/styck
Lägg till i favoritlistan
Läs mer...

I lager: 1

  • Betala säkert med kort
  • Maila oss, vi svarar snabbt!
  • Snabba leveranser
  • Öppet i butik och telefon mellan 9-18 Vardagar samt 10-15 (OBS Ny tid) på Lördagar*, ring +46 (0) 303-776303

* Vi kan vara upptagna, ring igen om vi inte svarar!

  • FabrikatSavöx
  • Servo TypeBrushless
  • Operating Voltage:12.6V (3s LiPo)
  • Operating Temperature Range:-10°C to 50°C
  • Operating Speed (12V):0.11s/60°
  • Stall Torque (12.0V):75kg/cm
  • Potentiometer Drive:VR
  • Bearing Type:3x Ball Bearings
  • Gear Type:Specialized SteelSpecialized Steel
  • Case:Aluminium
  • Dimensions:L41xW21xH39.9mm
  • Vikt:90g
  • VarumärkeSavöx

Beskrivning

Art.nr: SAV-SW2293SG

SAVÖX SAV-SW2293SG - SW-2293SG Crawler Servo 75Kg 3s LiPo Powered Alu Brushless Steelgear WP


Blue Line
Built for adventure, the Blue Line is IP67 waterproof-rated and ready for anything. These servos are designed for boats, trail crawlers, and RC builds that encounter mud, water, and extreme terrain. With rugged construction, durable gearing, and high-voltage compatibility, Blue Line servos keep going even when the trail gets rough. When you can’t predict the conditions - this is the servo to trust.



Direct Power, 3S Ready
Introducing the SW-2293SG — a direct-power servo designed for crawlers using 3S LiPo setups. Runs straight from your LiPo — no BEC bottleneck, no compromises.

Watch to learn about the separate power/signal wiring and why this format delivers more torque.

Steel Gear Durability
Rugged gear train engineered to handle shock loads and heavy-duty crawling.

High Torque Output
Over 70kg/cm at 12.6V, delivering strength for demanding crawler applications.

IP67 Waterproof
Built to withstand mud, water, and extreme trail conditions.

Specs:
  • Line: BLUE LINE
  • Application: CAR / BOAT
  • Servo Size: Standard
  • Operating Voltage: 12.6V (3s LiPo)
  • Speed @12.6V: 0.11s/60°
  • Torque @12.6V: 75kg/cm
  • Amplifier Type: Digital Controller
  • Motor Type: Patented Lightweight Brushless
  • Case Type: Aluminium
  • Protection: Waterproof (IP67)
  • Dimensions: L41xW21xH39.9mm
  • Weight: 90g
  • Gear Type: Specialized Steel
  • Compatibility: Sanwa SUR & SSR, Futaba UR & SR
  • PCB Board: 32-bit
  • Horn Gear Spline: 25T (Φ6)
  • Rotating Direction: Clockwise (when 1000→2000μsec)
  • Max Travel: ~180° (when 600→2400μsec)
  • Operating Travel: 100° (when 1000→2000μsec)
  • Neutral Position: 1500μsec
  • Bearing: 3x Ball Bearings
  • Potentiometer: VR
  • Cable Diameter: 22AWG
  • Cable Length: 450±5mm
  • Connector: JR
  • Stall Current @12.6V: 6500mA
  • Operating Current @12.6V: 100mA
  • Idle Current: 5mA
  • Dead Band Width: 3-5μsec
  • Frequency Range: 50-360Hz
  • Control System: Pulse Width Modification
  • Operating Temperature: -10°C to 50°C
Tillbaka till toppen