Ultimate Racing Bearing Cleaning unit
129 SEK per pc
- Secure payment by card
- E-mail us, we reply swiftly!
- Fast Deliveries
- Open at shop and on phone between 16-20 Weekdays and 11-15 (OBSERVE New time) Weekends * call +46 (0) 303-776303
- Click on "Chat with us" and we can help you immediately!
* We can be busy, call again if we don´t answer!
- BrandUltimate Racing
Description
Article no.: UR8405
Tool for cleaning ball bearings. Open the container, put in the bearings you want to clean, fill 1/3 with cleaner and put on the lid. Shake for about 30 seconds or until the bearings are thoroughly cleaned.
If you are going to clean a ball bearing with a rubber seal, the seal should be removed first, otherwise the rubber may be damaged. You can wipe the rubber with a clean cloth or use soapy water. If you use soapy water, make sure to dry the rubber completely before putting it back into the bearing.
After cleaning the bearing, it is important to oil it. Add 2 drops of oil and swirl the fund between your fingers to spread the oil around. If you have ceramic bearings, you only need 1 drop of oil.
If you are going to clean a ball bearing with a rubber seal, the seal should be removed first, otherwise the rubber may be damaged. You can wipe the rubber with a clean cloth or use soapy water. If you use soapy water, make sure to dry the rubber completely before putting it back into the bearing.
After cleaning the bearing, it is important to oil it. Add 2 drops of oil and swirl the fund between your fingers to spread the oil around. If you have ceramic bearings, you only need 1 drop of oil.