Graupner 3D Copter Alpha 300Q HoTT - BNF
4,795 SEK per styck
- Secure payment by card
- E-mail us, we reply swiftly!
- Fast Deliveries
- Open at shop and on phone between 16-20 Weekdays and 11-15 (OBSERVE New time) Weekends * call +46 (0) 303-776303
- Click on "Chat with us" and we can help you immediately!
* We can be busy, call again if we don´t answer!
- BrandGraupner
Description
Article no.: GRA_16530-HOTT
NOTE: This product only works with Graupner Transmitters/Receivers!
Flying multirotor will never be the same again!
The Alpha 300Q 3D is the new standard for anything multirotor! Whether you are a seasoned 3D pilot or proficient race copter pilot the Alpha 300Q 3D will bring you to the next level of multirotor flying. Inverted flight, tic toc's or any other 3D maneuvers the Alpha 300Q 3D does at all bending the law of physics and defying gravity taking you to the next level of 3D flying.
The Alpha 300Q 3D is built around a strong 3mm lightweight carbon competition frame, making it extremely durable during all flight phases. Parts are easily replaced as needed, requiring only basic tools. To assist with flight orientation, a set of high intensity LED lights are mounted on top and bottom of the frame making it stand out in the sky even for night flying!
Transitioning into 3D flight is easy with the Alpha 300Q 3D race copter. If you are a beginner you can change modes during flight at any time between attitude and 3D mode. Experienced 3D helicopter pilots will feel instantly at home with the Alpha 300Q and in no time you will bend and defy the laws of physics and gravity.
PACKAGE CONTENT:
- 3D Quadcopter ALPHA 300Q
- GR-18 receiver with integrated flight-control (No. S1019)
- 2 ULTRA Brushless Motors 2809-2300KV with right-hand thread (No. S7052)
- 2 ULTRA Brushless Motors 2809-2300KV with left-hand thread (No. S7051)
- 4 ULTRA BRUSHLESS CONTROL 3D 20A ONESHOT Controller with BL Heli Software (No. S3057)
- 2 each 6-inch 3D propeller red (R / L) (No. 2948.6X3)
- 2 each 6-inch 3D Propeller white (R / L) (No. 2946.6X3)
- 50-60 km/h with original equipment and 3S LiPo
- Expertly built no assembly required
- Ready to fly just bind it your Graupner radio
- Integrated triple mode receiver and flight controller
- Selectable flight modes (beginner to expert)
- Receiver with built in telemetry (main voltage, RX voltage, RF signal strength, RX temperature)
- Live voice telemetry announcements of flight data
- Voice notifications of battery level and radio range
- Over the air access for settings with any Graupner HoTT radio (6ch and up)
- No computer or setup boxes needed
- Graupner high performance copter 3D-Props
- High frequency switching Graupner performance ESC
Specifications:
Rotorbase: 11.8” (300 mm)
Height: 2.26” (83 mm)
Empty Weight: 16.22 oz (460 g)
recommended Accessories:
- LiPo 3-4S, for instance, Graupner V-Maxx 4S 1500 mAh (No. 9717.4.D35)
- Radio, for instance, Graupner mx-12 (No. 33112.77)
Flying multirotor will never be the same again!
The Alpha 300Q 3D is the new standard for anything multirotor! Whether you are a seasoned 3D pilot or proficient race copter pilot the Alpha 300Q 3D will bring you to the next level of multirotor flying. Inverted flight, tic toc's or any other 3D maneuvers the Alpha 300Q 3D does at all bending the law of physics and defying gravity taking you to the next level of 3D flying.
The Alpha 300Q 3D is built around a strong 3mm lightweight carbon competition frame, making it extremely durable during all flight phases. Parts are easily replaced as needed, requiring only basic tools. To assist with flight orientation, a set of high intensity LED lights are mounted on top and bottom of the frame making it stand out in the sky even for night flying!
Transitioning into 3D flight is easy with the Alpha 300Q 3D race copter. If you are a beginner you can change modes during flight at any time between attitude and 3D mode. Experienced 3D helicopter pilots will feel instantly at home with the Alpha 300Q and in no time you will bend and defy the laws of physics and gravity.
PACKAGE CONTENT:
- 3D Quadcopter ALPHA 300Q
- GR-18 receiver with integrated flight-control (No. S1019)
- 2 ULTRA Brushless Motors 2809-2300KV with right-hand thread (No. S7052)
- 2 ULTRA Brushless Motors 2809-2300KV with left-hand thread (No. S7051)
- 4 ULTRA BRUSHLESS CONTROL 3D 20A ONESHOT Controller with BL Heli Software (No. S3057)
- 2 each 6-inch 3D propeller red (R / L) (No. 2948.6X3)
- 2 each 6-inch 3D Propeller white (R / L) (No. 2946.6X3)
- 50-60 km/h with original equipment and 3S LiPo
- Expertly built no assembly required
- Ready to fly just bind it your Graupner radio
- Integrated triple mode receiver and flight controller
- Selectable flight modes (beginner to expert)
- Receiver with built in telemetry (main voltage, RX voltage, RF signal strength, RX temperature)
- Live voice telemetry announcements of flight data
- Voice notifications of battery level and radio range
- Over the air access for settings with any Graupner HoTT radio (6ch and up)
- No computer or setup boxes needed
- Graupner high performance copter 3D-Props
- High frequency switching Graupner performance ESC
Specifications:
Rotorbase: 11.8” (300 mm)
Height: 2.26” (83 mm)
Empty Weight: 16.22 oz (460 g)
recommended Accessories:
- LiPo 3-4S, for instance, Graupner V-Maxx 4S 1500 mAh (No. 9717.4.D35)
- Radio, for instance, Graupner mx-12 (No. 33112.77)