Fuse TRXID3S-XT60 Charging Cable - XT60 for Traxxas ID 3s
142 SEK per pc
- Secure payment by card
- E-mail us, we reply swiftly!
- Fast Deliveries
- Open at shop and on phone between 16-20 Weekdays and 11-15 (OBSERVE New time) Weekends * call +46 (0) 303-776303
- Click on "Chat with us" and we can help you immediately!
* We can be busy, call again if we don´t answer!
- BrandFuse
Description
Article no.: FU_64338
Practical charging cable for charging Traxxas ID LiPo batteries on a standard computer charger. The charging cable has the Traxxas ID connector at one end and the XT60 + XH balancing connector at the other end. The charging cable itself is 14AWG and approx. 15 cm long.
Cable 14AWG
Length 15 cm
The Traxxas ID 2s and 3s charging cables from Fuse use the same connector as the 4s batteries. They fit each other, so there is no problem. However, keep in mind that it is possible to connect the 2s and 3s connectors incorrectly in the charging cable. Therefore, be aware that plus goes to plus, and minus to minus (this is marked on the connectors). You can also easily see this by seeing that red wire goes red and black to black. Beyond that, it's a good rule that no force should be needed to connect the wires. If this is the case, check the polarity once more.
Cable 14AWG
Length 15 cm
The Traxxas ID 2s and 3s charging cables from Fuse use the same connector as the 4s batteries. They fit each other, so there is no problem. However, keep in mind that it is possible to connect the 2s and 3s connectors incorrectly in the charging cable. Therefore, be aware that plus goes to plus, and minus to minus (this is marked on the connectors). You can also easily see this by seeing that red wire goes red and black to black. Beyond that, it's a good rule that no force should be needed to connect the wires. If this is the case, check the polarity once more.