• Quality products for RC
  • Fast delivery
  • Customer service is open between 10: 00-16: 00 (+ 46 (0) 303-776303)
  • Mail us, we reply swiftly
0
Your cart
Savöx SW1213SG Servo 38Kg 0,16s HV Alu Brushless Steel Drive WP
Savöx SW1213SG Servo 38Kg 0,16s HV Alu Brushless Steel Drive WP
Savöx SW1213SG Servo 38Kg 0,16s HV Alu Brushless Steel Drive WP - 2
Savöx SW1213SG Servo 38Kg 0,16s HV Alu Brushless Steel Drive WP - 3

Savöx SW1213SG Servo 38Kg 0,16s HV Alu Brushless Steel Drive WP

895 SEK per pc
Add to list of favorites
Read more...

In stock: 1

  • Secure payment by card
  • E-mail us, we reply swiftly!
  • Fast Deliveries
  • Open at shop and on phone between 16-20 Weekdays and 11-15 (OBSERVE New time) Weekends * call +46 (0) 303-776303
  • Click on "Chat with us" and we can help you immediately!

* We can be busy, call again if we don´t answer!

  • BrandSavöx
  • Servo TypeBrushless
  • Operating Voltage:6.0V-8.4V
  • Operating Temperature Range:-10°C to 50°C
  • Operating Speed (6.0V):0.19s/60°
  • Operating Speed (7,4V):0.16s/60°
  • Operating Speed (8.4V):0.14s/60°
  • Stall Torque (6.0V):32kg/cm
  • Stall Torque (7,4V):38kg/cm
  • Stall Torque (8.4V):42kg/cm
  • Potentiometer Drive:VR
  • Bearing Type:2x Ball Bearings
  • Gear Type:Specialized Steel
  • Dimensions:L40.6xW20.7xH46.2mm
  • Weight:83g
  • BrandSavöx

Description

Article no.: SAV-SW1213SG

SAVÖX SAV-SW1213SG - SW-1213SG Servo 38Kg 0.16s HV Alu Brushless Steel Gears WP

Blue Line
Built for adventure, the Blue Line is IP67 waterproof-rated and ready for anything. These servos are designed for boats, trail crawlers, and RC builds that encounter mud, water, and extreme terrain. With rugged construction, durable gearing, and high-voltage compatibility, Blue Line servos keep going even when the trail gets rough. When you can’t predict the conditions - this is the servo to trust.

Specs:
  • Line: BLUE LINE
  • Application: CAR / BOAT
  • Servo Size: Standard
  • Operating Voltage: 6.0V-8.4V
  • Speed @6.0V: 0.19s/60°
  • Torque @6.0V: 32kg/cm
  • Speed @7.4V: 0.16s/60°
  • Torque @7.4V: 38kg/cm
  • Speed @8.4V: 0.14s/60°
  • Torque @8.4V: 42kg/cm
  • Amplifier Type: Digital Controller
  • Motor Type: Coreless
  • Case Type: Hybrid (Aluminium/Composite)
  • Protection: Waterproof (IP67)
  • Dimensions: L40.6xW20.7xH46.2mm
  • Weight: 83g
  • Gear Type: Specialized Steel
  • Compatibility: Sanwa SSR
  • PCB Board: 12-bit
  • Horn Gear Spline: 25T (Φ6)
  • Rotating Direction: Counter clockwise (when 1000→2000μsec)
  • Max Travel: ~130° (when 800→2200μsec)
  • Operating Travel: 100° (when 1000→2000μsec)
  • Neutral Position: 1500μsec
  • Bearing: 2x Ball Bearings
  • Potentiometer: VR
  • Cable Diameter: 22AWG
  • Cable Length: 450±5mm
  • Connector: JR
  • Stall Current @6.0V: 4200mA
  • Operating Current @6.0V: 130mA
  • Stall Current @7.4V: 5200mA
  • Operating Current @7.4V: 150mA
  • Stall Current @8.4V: 6000mA
  • Operating Current @8.4V: 180mA
  • Idle Current: 5mA
  • Dead Band Width: 3-5μsec
  • Frequency Range: 50-360Hz
  • Control System: Pulse Width Modification
  • Operating Temperature: -10°C to 50°C
Back to top