• Quality products for RC
  • Fast delivery
  • Customer service is open between 10: 00-16: 00 (+ 46 (0) 303-776303)
  • Mail us, we reply swiftly
0
Your cart
Black Horse MIG-29 For Turbo Jet Engine 1635mm Elland Rack
Black Horse MIG-29 For Turbo Jet Engine 1635mm Elland Rack
Black Horse MIG-29 For Turbo Jet Engine 1635mm Elland Rack - 2
Black Horse MIG-29 For Turbo Jet Engine 1635mm Elland Rack - 3

Black Horse MIG-29 For Turbo Jet Engine 1635mm Elland Rack

19,995 SEK per pc
Add to list of favorites
Read more...

In stock: 1

  • Secure payment by card
  • E-mail us, we reply swiftly!
  • Fast Deliveries
  • Open at shop and on phone between 16-20 Weekdays and 11-15 (OBSERVE New time) Weekends * call +46 (0) 303-776303
  • Click on "Chat with us" and we can help you immediately!

* We can be busy, call again if we don´t answer!

  • BrandBlack Horse Model
  • Operating mode:Turbine
  • Delivered as:Almost-Ready-To-Fly
  • Suitable for:Experienced Expert
  • Plane type:Jet
  • Span:1635mm
  • Length:2260mm
  • Weight:12.4kg
  • Wing Area:79.3dm2
  • Transmitter:Not Included
  • Motor:Included
  • Motor Type:Turbine
  • Aileron:Yes
  • Flaps:Yes
  • Battery:Included
  • Charger:Included
  • Also includes:Electric Retract Gear with oleo struts
  • Need to be completed with:Radio: 8 channels minimum, Servos: 7x (HV high torque servos) - size: 35x15mm & 2x HV high torque servos - size 40x20mm (torque: 35-42kg/cm Elevator), Engine: Turbine Jet Engine with minimum 13kg thrust, Receiver battery: 2S-7.4V 2200-3200mAh
  • BrandBlack Horse

Description

Article no.: BH185

Black Horse BH185 - MIG-29

  • ALL BALSA - PLYWOOD CONSTRUCTION
  • COVERED IN A PRINTED HEAT-SHRINK FILM

SPECIFICATIONS:
  • Wingspan: 1635mm
  • Length: 2260mm
  • Weight: 12.4kg
  • Wing area: 79.3dm2
  • Wing loading: 156.3g/dm2
  • Wing type: Naca Airfoil
  • Servo mounts: 37x16mm & 41x21mm
  • Gear type: Electric Retract Gear with oleo struts (included) and controller box (included)

Parts listing required (not included):

  • Radio: 8 channels minimum
  • Servos: 7x (HV high torque servos) - size: 35x15mm & 2x HV high torque servos - size 40x20mm (torque: 35-42kg/cm Elevator)
  • Engine: Turbine Jet Engine with minimum 13kg thrust
  • Receiver battery: 2S-7.4V 2200-3200mAh
Back to top